Django Carbon Mountain Bike Frame


Django Carbon Mountain Bike Frame


SKU: #BE2020911 Categories: ,
View cart



The Django Carbon Mountain Bike Frame is DeVinci’s jack-of-all-trades trail bike, designed to attack the trail with speed and precision using the sure-footedness of 29in wheels and the lively feel of the Split Pivot suspension design. With 120mm of rear travel that’s designed to pair with a 140mm travel fork up front, this bike is capable of covering ground quickly but doesn’t shy away from technical trail challenges. The geometry is well-balanced, providing the stability you need at higher speeds while delivering XC-bike efficiency on big rides with plenty of vertical gain. In addition, the geometry can be adjusted via a flip-chip that switches between Low and High settings, allowing you to tune the bike’s handling for more capable descending, or for a little more efficiency on the climbs.

The trademark feature of DeVinci’s full-suspension mountain bikes is the Dave Weagle-designed Split Pivot suspension. Dave Weagle is well known in the industry as the engineer behind DW-Link, and his designs deliver some of the best suspension characteristics on the market. Split Pivot’s basic design consists of a main pivot and a concentric rear axle pivot separated by the chainstay (hence the name Split Pivot), as well as the brake link (seatstay) that floats between the concentric rear axle pivot and the rocker link that controls the shock. The floating brake link isolates braking forces from acceleration and suspension forces, resulting in uncompromising traction when you’re charging across rough terrain—even while braking or pedaling. Many other designs have a tendency to firm up a bit under braking, reducing suspension sensitivity through choppy terrain and thus losing some traction. DeVinci’s Split Pivot remains active, soaking up braking bumps and squared-edged hits effortlessly while retaining a supportive mid-stroke for pedaling, climbing, and popping off lips and rollers.

As we briefly mentioned above, the Django’s geometry strikes a good balance between aggressive trail bike descending capabilities and XC-bike pedaling performance. The long reach figures give you a confident position for steeper descents, balanced by stubby 17-inch chainstays to keep the handling playful and nimble. In the Low geometry setting a 68-degree head tube angle and a 13.2-inch bottom bracket height provide the stability needed to confidently charge through rugged terrain, along with a lower center of gravity for precise cornering feel. If your upcoming ride consists of an all-day marathon of steep climbs and tight switchbacks, flip the suspension chip to the High setting to raise the bottom bracket 0.2-inches and steepen the head angle half a degree. This gives you a bit more control to put the front wheel where you need it, which is helpful for cross country riding.

Like DeVinci’s other carbon bikes, the Django is constructed using their mountain bike specific DMC-G carbon lay-up. Using EPS molding, DeVinci creates a monocoque carbon frame with flawless consistency throughout the carbon layers, eliminating resin-pooling and inconsistencies that can negatively affect the strength of the frame. DeVinci puts a lot of emphasis on frame strength and rigidity, inspiring absolute confidence when you’re smashing through technical terrain. It also allows DeVinci to offer a lifetime frame warranty to the original owner. The frame has internal cable routing for clean lines throughout, and even includes a dropper seatpost. The rear triangle allows clearance for up to a 2.6in tire, and its asymmetrical chainstays with Boost hub spacing deliver exceptional torsional stiffness for the frame and rear wheel.

  • DeVinci’s do-it-all 29er trail bike that excels on diverse terrain
  • 4.7in of Split Pivot travel stays active while braking for unparalleled traction
  • DMC-G carbon frame is lightweight, stiff, and responsive
  • Balanced geometry is stable but doesn’t feel sluggish on tight trails
  • Short chainstays keep the handling playful and nimble
  • Asymmetrical construction for excellent torsional stiffness
  • 29in wheels roll fast and glide smoothly over technical terrain
  • Frame allows clearance for up to 2.6in tires
Frame Material
Carbon DMC-G
Split Pivot
Wheel Size
Rear Shock
Fox Float DPS Factory Series
Rear Travel
Head Tube Diameter
1 1/8 – 1 1/2in tapered
Headset Included
FSA Orbit 1.5 Zero Stack
Bottom Bracket Type
Cable Routing
Front Derailleur Mount
Brake Type
post-mount disc
[small] Fox Transfer Performance (100mm travel), [medum] Fox Transfer Performance (125mm travel), [large, x-large] Fox Transfer Performance (150mm travel)
Seatpost Diameter
Seat Collar
Rear Axle
12 x 148mm Boost
Recommended Use
Manufacturer Warranty

Additional information




Mate Tectonic


There are no reviews yet.

Be the first to review “Django Carbon Mountain Bike Frame”

Vendor Information

  • No ratings found yet!

General Inquiries

There are no inquiries yet.