Ripmo SLX Mountain Bike


Ripmo SLX Mountain Bike


SKU: #BE2020929 Categories: ,
View cart


numerous “bike of the year” awards (even as recently as 2020), the recent release of the Ripmo AF with its more aggressive geometry and suspension had us wondering when the carbon Ripmo would get the same treatment. Fortunately for us, the Ripmo V2 is now here, giving riders the increased capability of the Ripmo AF, but with a carbon frame that saves roughly 2lb over the aluminum version—all while offering a stiffer chassis that climbs, corners, and charges harder.

Like the Ripmo, the Ripmo V2 was developed under the rigors of competition, meaning Ibis worked extensively with their professional riders to ensure the new bike meets the increasing demands of modern enduro courses. A disguised version of the Ripmo V2 saw four top-ten finishes in the 2019 EWS, already proving its success at the highest level of the sport.

The new recipe starts with a more progressive shock rate that ramps up near the end of the stroke, preventing harsh bottom-outs when you’re charging through rock gardens and airing over drops. At the same time, the initial stroke is suppler to improve small-bump sensitivity and smooth out chattery sections of trail. Downhill enthusiasts will be pleased to know that the new bike is now compatible with coil shocks thanks to this revised shock rate.

Ibis nailed the geometry on the first Ripmo, so the V2 only sees minor tweaks to give the bike some extra stability when the trail points downhill. This comes in the form of a 1-degree slacker head tube angle, moving to 64.9-degrees compared to 65.9 on the original model. The reach is also increased by a few millimeters, rounding things off with a nicely modern 475mm on a size large. These numbers let you open it up a bit more on high-speed descents, but maintain the same lively handling and precise cornering the Ripmo was famous for.

Riding bikes isn’t all downhill (unless you’re a park rat or shuttle junky), so considering that most of us have to earn our turns, Ibis gives the Ripmo V2 the same uncanny climbing abilities as its predecessor. A lot of this has to do with the ultra-efficient DW-Link suspension platform, but a big part is the steep 76-degree seat tube angle that naturally shifts your weight forward in the saddle. This puts you in a comfortable position for putting power to the pedals, and keeps the front wheel from wandering on steep climbs. If you were to ride the Ripmo and Ripmo V2 back to back, you wouldn’t notice any difference in pedaling performance despite the V2’s more aggressive descending traits.

On the Ripmo V2 Ibis sticks with their esteemed DW-Link suspension due to its firm pedaling platform and smooth feel over rough terrain. Ibis did modify the suspension tune though, incorporating the Traction Tune philosophy that first debuted on the Mojo HD5. Traction Tune uses extra-light damping in the high-speed compression and rebound circuits, which allows the wheels to react more quickly to changes in terrain for smoother bump absorption and glued-to-the-ground traction. By balancing this effect front and rear, the bike chassis stays flat relative to the ground as the suspension cycles through its travel, keeping the geometry figures consistent for more predictable handling in rough terrain. Traction Tune is a feature that Ibis’s team riders have been pushing for all along, but it ultimately provides benefits to riders of all skill levels.

As a new-age 29er all-mountain bike, the Ripmo V2 incorporates a host of useful features for the aggressive trail rider and enduro racer. New linkage guards protect the upper and lower links from contamination, while downtube and swingarm guards prevent damage to the carbon frame. There’s enough tire clearance to run massive 2.6-inch rubber, internal cable tunnels for easier maintenance and routing, clearance for a full-size bottle, and the ability to run a 175-millimeter or longer dropper post on the medium through extra-large frames (small works with 150-millimeter droppers). Ibis uses IGUS bushings on the lower link for improved longevity over ball bearings, and backs them up with a lifetime warranty for good measure.

  • Ibis’ longer travel 29er is more refined than ever
  • Carbon frame saves 2lb claimed weight over the Ripmo AF
  • More progressive 5.7in DW-Link suspension caters to hard-chargers
  • Slacker head tube angle lets you go faster on descents
  • Climbs as aggressively as the original Ripmo
  • 6in fork soaks up bigger hits with ease
  • SLX drivetrain offers crisp Shimano shifting without the high price tag
Frame Material
carbon fiber
Rear Shock
Fox Float Performance DPX2 with EVOL
Rear Travel
Fox Float 36 Performance, 44mm offset
Front Travel
Cane Creek 40 ZS44/ZS56
Shimano SLX M7120
Rear Derailleur
Shimano SLX M7120, Shadow Plus
ISCG-05 via optional removable adapter
Shimano SLX M7120
Chainring Sizes
Bottom Bracket
Shimano SLX BB52
Bottom Bracket Type
BSA (English threaded)
Shimano SLX
Cassette Range
10 – 51t
Shimano SLX M7120
Shimano SLX M7120, 4-piston
Brake Type
hydraulic disc
[front] 200mm Shimano SM-RT66, [rear] 180mm Shimano SM-RT66
Ibis Aluminum
Handlebar Width
Lizard Skins Charger Evo
Ibis Aluminum
WTB Silverado
Bike Yoke Revive Dropper
Seat Collar
Ibis S35 Aluminum
Ibis Logo
Front Axle
15 x 110mm Boost
Rear Axle
12 x 148mm Boost
Maxxis Assegai EXO+ WT
Tire Size
29 x 2.5in
not included
downtube protector, swingarm protector, lower link protector
Recommended Use
enduro, trail
Manufacturer Warranty
[frame] 7 years

Additional information


Large, Medium, Small, X-Large


Grey, Blue


There are no reviews yet.

Be the first to review “Ripmo SLX Mountain Bike”

Vendor Information

  • No ratings found yet!

General Inquiries

There are no inquiries yet.